<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Case_Spray Engineering_M345 Archives - SweBend</title>
	<atom:link href="https://swebend.com/faq_category/case-spray-engineering-m345/feed/" rel="self" type="application/rss+xml" />
	<link></link>
	<description>Purpose-built bending machines for demanding production</description>
	<lastBuildDate>Wed, 15 Jul 2026 11:22:28 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>

<image>
	<url>https://swebend.com/wp-content/uploads/2024/10/cropped-favicon-swebend-32x32.png</url>
	<title>Case_Spray Engineering_M345 Archives - SweBend</title>
	<link></link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>What materials and thicknesses can a joggling machine handle?</title>
		<link>https://swebend.com/faq-items/what-materials-and-thicknesses-can-a-joggling-machine-handle/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:17 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/what-materials-and-thicknesses-can-a-joggling-machine-handle/</guid>

					<description><![CDATA[<p>Capacity depends on machine configuration and the groove geometry of the forming rolls. Heavy-duty joggling machines like the JM-140 typically handle mild steel up to 15 mm thick, with cylinder diameters ranging from around 1,000 mm to 5,000 mm. Harder materials or tighter grooves may reduce the maximum thickness.</p>
<p>The post <a href="https://swebend.com/faq-items/what-materials-and-thicknesses-can-a-joggling-machine-handle/">What materials and thicknesses can a joggling machine handle?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Capacity depends on machine configuration and the groove geometry of the forming rolls. Heavy-duty joggling machines like the JM-140 typically handle mild steel up to 15 mm thick, with cylinder diameters ranging from around 1,000 mm to 5,000 mm. Harder materials or tighter grooves may reduce the maximum thickness.</p>
<p>The post <a href="https://swebend.com/faq-items/what-materials-and-thicknesses-can-a-joggling-machine-handle/">What materials and thicknesses can a joggling machine handle?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>When does investing in a dedicated joggling machine make sense?</title>
		<link>https://swebend.com/faq-items/when-does-investing-in-a-dedicated-joggling-machine-make-sense/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:17 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/when-does-investing-in-a-dedicated-joggling-machine-make-sense/</guid>

					<description><![CDATA[<p>A dedicated joggling machine is the right choice when production involves repeated cylinder end forming, when plate thickness exceeds what manual methods can reliably handle, or when tolerance consistency across batches is critical. The investment pays back through reduced scrap, faster cycle times, and eliminated rework. Machines with interchangeable forming rolls also adapt as new</p>
<p>The post <a href="https://swebend.com/faq-items/when-does-investing-in-a-dedicated-joggling-machine-make-sense/">When does investing in a dedicated joggling machine make sense?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>A dedicated joggling machine is the right choice when production involves repeated cylinder end forming, when plate thickness exceeds what manual methods can reliably handle, or when tolerance consistency across batches is critical. The investment pays back through reduced scrap, faster cycle times, and eliminated rework. Machines with interchangeable forming rolls also adapt as new flange geometries are introduced &#8211; see our tailored forming FAQ for more.</p>
<p>The post <a href="https://swebend.com/faq-items/when-does-investing-in-a-dedicated-joggling-machine-make-sense/">When does investing in a dedicated joggling machine make sense?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What is a joggle used for?</title>
		<link>https://swebend.com/faq-items/what-is-a-joggle-used-for/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:16 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/what-is-a-joggle-used-for/</guid>

					<description><![CDATA[<p>In metal forming, a joggle is a stepped offset that lets two plates or cylinder sections overlap while the outer surface stays flush. The most common industrial use is in pressure vessel and tank construction, where joggled cylinder ends create a consistent lap joint for welding. Because the shape must be uniform around the part,</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-a-joggle-used-for/">What is a joggle used for?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>In metal forming, a joggle is a stepped offset that lets two plates or cylinder sections overlap while the outer surface stays flush. The most common industrial use is in pressure vessel and tank construction, where joggled cylinder ends create a consistent lap joint for welding. Because the shape must be uniform around the part, joggles are produced on dedicated forming machines rather than by hand.</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-a-joggle-used-for/">What is a joggle used for?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What is joggling?</title>
		<link>https://swebend.com/faq-items/what-is-joggling/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:15 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/what-is-joggling/</guid>

					<description><![CDATA[<p>Joggling is a metal-forming process that creates a stepped offset at the end of a cylinder or sheet so two pieces can overlap and sit flush at a joint. In heavy industrial work it is used to form the flanged ends of pressure vessel cylinders before welding. The offset has to be uniform across the</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-joggling/">What is joggling?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Joggling is a metal-forming process that creates a stepped offset at the end of a cylinder or sheet so two pieces can overlap and sit flush at a joint. In heavy industrial work it is used to form the flanged ends of pressure vessel cylinders before welding. The offset has to be uniform across the full part, which is why dedicated joggling machines are used rather than hand-forming.</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-joggling/">What is joggling?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What is the process of a joggling machine?</title>
		<link>https://swebend.com/faq-items/what-is-the-process-of-a-joggling-machine/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:14 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/what-is-the-process-of-a-joggling-machine/</guid>

					<description><![CDATA[<p>A joggling machine forms a stepped offset at the end of a cylinder or plate by pressing the material between two profiled rolls. The cylinder rotates while the rolls apply controlled force, producing a consistent step geometry around the full circumference. The process is used in pressure vessel, tank, and process equipment manufacturing to prepare</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-the-process-of-a-joggling-machine/">What is the process of a joggling machine?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>A joggling machine forms a stepped offset at the end of a cylinder or plate by pressing the material between two profiled rolls. The cylinder rotates while the rolls apply controlled force, producing a consistent step geometry around the full circumference. The process is used in pressure vessel, tank, and process equipment manufacturing to prepare cylinder ends for welding.</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-the-process-of-a-joggling-machine/">What is the process of a joggling machine?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Why does a pressure vessel need joggled grooves along the cylinder body?</title>
		<link>https://swebend.com/faq-items/why-does-a-pressure-vessel-need-joggled-grooves-along-the-cylinder-body/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Tue, 12 May 2026 16:34:13 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/why-does-a-pressure-vessel-need-joggled-grooves-along-the-cylinder-body/</guid>

					<description><![CDATA[<p>Joggled grooves along the cylinder body - rillor in Swedish, like the hoops pressed into an oil drum at industrial scale - serve three functions in pressure vessel construction. They strengthen the shell against external collapse and internal stress, they drive the cylinder into a more accurate circular cross-section, and - most importantly for boiler</p>
<p>The post <a href="https://swebend.com/faq-items/why-does-a-pressure-vessel-need-joggled-grooves-along-the-cylinder-body/">Why does a pressure vessel need joggled grooves along the cylinder body?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Joggled grooves along the cylinder body &#8211; rillor in Swedish, like the hoops pressed into an oil drum at industrial scale &#8211; serve three functions in pressure vessel construction. They strengthen the shell against external collapse and internal stress, they drive the cylinder into a more accurate circular cross-section, and &#8211; most importantly for boiler and process vessel service &#8211; they let the wall absorb pressure and volume changes as gas or liquid inside the vessel expands and contracts under heat and pressure cycling. Without those rolled grooves, stress concentrates at welds and seams.</p>
<p>The post <a href="https://swebend.com/faq-items/why-does-a-pressure-vessel-need-joggled-grooves-along-the-cylinder-body/">Why does a pressure vessel need joggled grooves along the cylinder body?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
