<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Case_Spray Engineering_M346 Archives - SweBend</title>
	<atom:link href="https://swebend.com/faq_category/case-spray-engineering-m346/feed/" rel="self" type="application/rss+xml" />
	<link></link>
	<description>Purpose-built bending machines for demanding production</description>
	<lastBuildDate>Mon, 10 Aug 2026 14:55:34 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.5</generator>

<image>
	<url>https://swebend.com/wp-content/uploads/2024/10/cropped-favicon-swebend-32x32.png</url>
	<title>Case_Spray Engineering_M346 Archives - SweBend</title>
	<link></link>
	<width>32</width>
	<height>32</height>
</image> 
	<item>
		<title>When does a tailored section bending machine make more sense than a standard one?</title>
		<link>https://swebend.com/faq-items/when-does-a-tailored-section-bending-machine-make-more-sense-than-a-standard-one/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Thu, 11 Jun 2026 09:21:37 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/when-does-a-tailored-section-bending-machine-make-more-sense-than-a-standard-one/</guid>

					<description><![CDATA[<p>When the bend is at the limit of standard machines: tight ID for the section, heavy bar, exotic material, large-diameter pressure vessel rings, square or rectangular sections, or production volumes that demand short flat ends and consistent geometry. A tailored machine sizes the side-roll force, drive torque and tooling to the exact application, which means</p>
<p>The post <a href="https://swebend.com/faq-items/when-does-a-tailored-section-bending-machine-make-more-sense-than-a-standard-one/">When does a tailored section bending machine make more sense than a standard one?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>When the bend is at the limit of standard machines: tight ID for the section, heavy bar, exotic material, large-diameter pressure vessel rings, square or rectangular sections, or production volumes that demand short flat ends and consistent geometry. A tailored machine sizes the side-roll force, drive torque and tooling to the exact application, which means fewer passes, less scrap and a setup that an operator can run repeatably across a full production run.</p>
<p>The post <a href="https://swebend.com/faq-items/when-does-a-tailored-section-bending-machine-make-more-sense-than-a-standard-one/">When does a tailored section bending machine make more sense than a standard one?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Why use a Bluetooth Control Unit instead of CNC on a heavy-duty section bender?</title>
		<link>https://swebend.com/faq-items/why-use-a-bluetooth-control-unit-instead-of-cnc-on-a-heavy-duty-section-bender/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Thu, 11 Jun 2026 09:21:34 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/why-use-a-bluetooth-control-unit-instead-of-cnc-on-a-heavy-duty-section-bender/</guid>

					<description><![CDATA[<p>Both the ring bending and the spiraling work are hands-on processes. The operator reads the bar, walks around the machine, and adjusts pitch and roll position on the fly. A CNC system adds programming overhead and a fixed control station, which slows the workflow and limits visibility. A wireless Control Unit lets the operator stay</p>
<p>The post <a href="https://swebend.com/faq-items/why-use-a-bluetooth-control-unit-instead-of-cnc-on-a-heavy-duty-section-bender/">Why use a Bluetooth Control Unit instead of CNC on a heavy-duty section bender?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Both the ring bending and the spiraling work are hands-on processes. The operator reads the bar, walks around the machine, and adjusts pitch and roll position on the fly. A CNC system adds programming overhead and a fixed control station, which slows the workflow and limits visibility. A wireless Control Unit lets the operator stay close to the workpiece during pre-bend, spiral and calibration, which improves both safety and throughput.</p>
<p>The post <a href="https://swebend.com/faq-items/why-use-a-bluetooth-control-unit-instead-of-cnc-on-a-heavy-duty-section-bender/">Why use a Bluetooth Control Unit instead of CNC on a heavy-duty section bender?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>What is a spiraling machine and how is it different from a standard section bender?</title>
		<link>https://swebend.com/faq-items/what-is-a-spiraling-machine-and-how-is-it-different-from-a-standard-section-bender/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Thu, 11 Jun 2026 09:21:31 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/what-is-a-spiraling-machine-and-how-is-it-different-from-a-standard-section-bender/</guid>

					<description><![CDATA[<p>A spiraling machine is a section bending machine configured with special rolls and a hydraulic pitch unit so that the workpiece advances along its own axis as it bends, producing a helix rather than a flat ring. Standard section benders only roll in plane. Spiraling needs both the lift/pitch motion and the bending force to</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-a-spiraling-machine-and-how-is-it-different-from-a-standard-section-bender/">What is a spiraling machine and how is it different from a standard section bender?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>A spiraling machine is a section bending machine configured with special rolls and a hydraulic pitch unit so that the workpiece advances along its own axis as it bends, producing a helix rather than a flat ring. Standard section benders only roll in plane. Spiraling needs both the lift/pitch motion and the bending force to be controlled together, which is why dedicated tooling and high-capacity drives are normally required.</p>
<p>The post <a href="https://swebend.com/faq-items/what-is-a-spiraling-machine-and-how-is-it-different-from-a-standard-section-bender/">What is a spiraling machine and how is it different from a standard section bender?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Can a heavy-duty section bender handle both production ring bending and tight-radius spiraling?</title>
		<link>https://swebend.com/faq-items/can-a-heavy-duty-section-bender-handle-both-production-ring-bending-and-tight-radius-spiraling/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Thu, 11 Jun 2026 09:21:28 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/can-a-heavy-duty-section-bender-handle-both-production-ring-bending-and-tight-radius-spiraling/</guid>

					<description><![CDATA[<p>Yes, provided the base machine is sized for the harder of the two jobs and the tooling can be swapped for the application. As an example, the SweBend SB3X-140 is used day-to-day for bending large support rings on pressure vessels, and the same machine spirals 100 x 30 mm S355 flat bar to ID 500</p>
<p>The post <a href="https://swebend.com/faq-items/can-a-heavy-duty-section-bender-handle-both-production-ring-bending-and-tight-radius-spiraling/">Can a heavy-duty section bender handle both production ring bending and tight-radius spiraling?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Yes, provided the base machine is sized for the harder of the two jobs and the tooling can be swapped for the application. As an example, the SweBend SB3X-140 is used day-to-day for bending large support rings on pressure vessels, and the same machine spirals 100 x 30 mm S355 flat bar to ID 500 mm with a special roll set. The headroom that makes the spiral possible is what makes the everyday rings cheap to produce.</p>
<p>The post <a href="https://swebend.com/faq-items/can-a-heavy-duty-section-bender-handle-both-production-ring-bending-and-tight-radius-spiraling/">Can a heavy-duty section bender handle both production ring bending and tight-radius spiraling?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Why does bending square and rectangular bar require special rolls?</title>
		<link>https://swebend.com/faq-items/why-does-bending-square-and-rectangular-bar-require-special-rolls/</link>
		
		<dc:creator><![CDATA[Peter Nilsson]]></dc:creator>
		<pubDate>Thu, 11 Jun 2026 09:21:25 +0000</pubDate>
				<guid isPermaLink="false">https://swebend.com/faq-items/why-does-bending-square-and-rectangular-bar-require-special-rolls/</guid>

					<description><![CDATA[<p>Square and rectangular sections deform very differently from round bar. The corners want to lift and the section wants to twist out of plane. Special rolls grip the section flats and constrain the corners through the bend, which keeps the bar in plane and prevents corner cracking. Without dedicated tooling you get scrap and inconsistent</p>
<p>The post <a href="https://swebend.com/faq-items/why-does-bending-square-and-rectangular-bar-require-special-rolls/">Why does bending square and rectangular bar require special rolls?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p><a href="https://swebend.com/news/square-rectangular-profile-3d-bending-video/">Square and rectangular sections</a> deform very differently from round bar. The corners want to lift and the section wants to twist out of plane. Special rolls grip the section flats and constrain the corners through the bend, which keeps the bar in plane and prevents corner cracking. Without dedicated tooling you get scrap and inconsistent ring geometry, especially when the bend is tight.</p>
<p>The post <a href="https://swebend.com/faq-items/why-does-bending-square-and-rectangular-bar-require-special-rolls/">Why does bending square and rectangular bar require special rolls?</a> appeared first on <a href="https://swebend.com">SweBend</a>.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
